|
Page 247
Go Back
Start
Page
Page
Links
Stock Jets
Tuning
Won't Idle
*New
Solex
DP Carb
*Solex
Rebuild Kit
Q&A
Will not Idle
*Weber
ICT &
Solex ICBE manifolds
07/28/09*
|
E-Mail Questions with Answers
Question---> How
do you hook up the 2 hoses to
the 34PICT Dual Vacuum Distributors
Answer--->
Look at the vacuum can on the side of the distributor. The hose coming from the
flat side is the Retard side. and the hose from the rounded side is for the Advance.
Now looking at the 34PICT carburetor,
the fitting on the Left side of the carb is the Advance
port which
hooks up to the rounded
side of the vacuum can. This is the smaller 3.5mm hose.
Then on the rear of the carb (rear of the car)
find the fitting close to the top of the carb. This should be connected
to the Retard
port on the Flat side of the distributor vacuum can. This is the
4.5mm Green Hose.
Note: The new H30/31PICT
carburetors
have the same vacuum ports as the 34PICT carbs
and
are
hooked up
the same as the 34PICT carbs. The
original 30PICT carburetors did not
the retard fitting.
Victor Comp. Products Inc.
**--Vic's--**Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016,
US
All Questions should be
E-Mailed to Vic's
Contact
Webmaster
|