Page 276

Go Back

Start Page

Parts Book
Photos & # 

Page Links

Need Price  & 
Availability of 
  these Parts
      "Quote"

  Q&A Cost to
Rebuild Motor

    11/18/08*

Alternator or Generator ? Which one is best for me --> *Click 

Adjusting the Gen/Alt. Belt --> *Click

Axle Nut Removal ------ *Click

How to remove ball joints ** "The easy way" **--> *Click

Brake Adjusting & Spring Clips replacing --> *Click

Bumper Mount Repair "Late Shock Type" --> *Click

Carburetor Rebuild or time for New Carb. --> *Click

Choke Adjusting "How To" --> *Click

Why is the cam tight after I had my motor align bored.--> *Click

How can I clean the carbon from my heat risers.--> *Click

I have a clicking sound coming from under the valve covers.--> *Click

Case Studs for the 1835cc motor--> *Click

I am looking for a mild racing clutch setup.--> *Click

Clutch Still Slips after replacing everything.--> *Click

Crankshaft checked for cracks "Poor mans Magna-flux" --> *Click

Why is the distributor rotor  pointed towards #3 cylinder when #1 piston is at TDC-- *Click

Exhaust Studs "How to remove Broken Ex. Studs"--> *info

Flywheel Lightening "How much" ? --> *Click

Can I put a 12v starter & flywheel on my 40hp motor.--> *Click

Front End Bushings don't fit. What should I do.?--> *Click

Generator Pulley Cheap Pulley is Bent or Bad, what to do? --> *Click

Generator or Alternator ? Which one is best for me --> *Click 

Generator / Alternator Belt adjusting --> *Click 

Gas Heater Repair & Links to Information on Heaters --> *Click

Headlight Bulb Dim "How to Hook up" --> *Click

King & Link spindle spacers welded --> *Click 

Lightened Flywheels --> *Click

Nut Removal ------ *Click

Shift Fork "Modified" --> *Click

Shift Box Adjusting --> *Click

Solex Throttle Shaft Bushings "How TO" --> *Click

Will not idle, Can't get Motor with Solex Carb to Idle--> *Click

How can I check my lower end without tearing down the motor--> *Click

Modified 1st & 2ed Shift Fork Shift How is it done & Why?--> *Click

Adjusting the Valves on my 40 hp motor. Is it done the same way.?--> *Click

Valve Keepers or Cheap Valves --> *Click

The passenger wheel leans out more at top then the drivers side--> *Click

How to install windshield in my buggy --> *Click

Wheel Bearing Adjusting Front KP & BJ "How To" --> *Click