Internet Store and Ecommerce Solution Provider - Free Web Site - Free Web Space and Site Hosting - Web Hosting - High Speed Internet
Search the Web

VWHelp.com         Valve Train

Page 105

Go Back

Start Page

Page Links

"Quote"

Adjust Valves

Adjust Valves  
on 1200cc

Cam Lift & Dur.

Cam Help "Buying
the right cam"

Cam Tool in Place

Oil Leaks

Q&A .
Valve Noise

Q&A .?
Cheap Valves 

*Valve / Guide
Part Numbers

Cam  Break- In

Need Price  &
 Availability of
  these Parts
     "Quote"

Eng Rebuild Mistakes

    10/20/08*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Lift and Duration of the most Popular Cams being used in VW's -- *Information    We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers ..vw@vwhelp.com..We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray ->  order  >  E-mail for price


Sample:  When  entering  VW  part  number  enter  with  spaces  211 611 011J   not   211611011J  

1-- #N11 152 1...Valve Adj. Nut...(8)...order  $ .40 each

2-- #T9110...Valve Keepers...Stock...(16)    "Quote" $0.25 each                   
2-- #V105 310...Valve Keepers...HD Locks...set of 16...Locks must not touch each other when on valve, Locks must clamp tight on valve "Quote" $9.95        Q&A  cheap valves ?



3-- #113 109 641B...Valve Spring Retainers...(8) stock  "Quote" $0.65 each
3-- #V109 463...Valve Spring Retainer ...Chromoly...each  "Quote" $3.00
3-- #VJ105306...Valve Spring Retainer ...Chromoly Set of 8 .. "Quote" $21.95
3-- #.....................Valve Spring Retainers...Alum...

4-- #113 109 621...Lash Caps 8mm dia ID... "Quote" $1.22

5-- #113 109 612A...Ex Valve 32mm...Stainless Steel  8mm stem. Stock 1600cc Size    "Quote" $7.95
                We strongly recommend the Stainless  Steel Ex. Valves. 
5-- #043 109 612...Ex Valve 32mm w/9mm stem..75-79..
5-- #043 109 611A...Ex Valve 30mm x 9mm 75-79 FI...
5-- #311 109 601...Ex Valve 35.5mm (1.389')....   "Quote" $4.95 each..  ( Note: Stainless Steel Intake valves are not necessary.)
5-- #VC1476...Ex Valve 35.5mm (1.389') S.S....   "Quote" $14.75 each.. adjusting valves->*Check  
5-- #VC1477...Ex Valve 37mm (1.456") S.S..... "Quote" $14.75 each
5-- #113 109 612...Ex Valve 30mm (1.181")...12/1300cc...stock... "Quote" $7.95
 . . . Valve Guides Wear and hinder heat transfer also allow the valve to rock thus not properly seating and
 . . . consequently overheating and breaking off and falling into your engine.
........Valves and Valve Guides *ck
  Setting 40HP Valves->*Click     Q&A  cheap valves ?

6-- #113 109 623C...Valve Spring..(8) stock... Stock Springs ok for 4500/5000 rpm.
  stock valve springs should check between 117# to 135# at 1.220" height

                    **
Springs will break if they have rust pits,**
6-- #V109 570..Valve Springs HD 6000rpm... "Quote" $17.95 /8 We have run these 7000+ rpm when new.
6-- #VC1491......Valve Springs "Dual"..order $18.95 /8  for very high rpm & radical cams also causes more wear on valve train. 
7-- #311 109 601...Intake Valve stock 35.5mm (1.398")... "Quote"      Q&A  cheap valves ?
7-- #VC1516...Intake Valve for 041 Head...39mm (1.535')... "Quote" $8.95
7-- #113 109 601D...Intake Valve 8/65-7/66...33mm (1.299")... "Quote" $4.95
7-- #113 109 601B...Intake Valve 40hp-1200cc...31.5mm (1.239")... "Quote" $3.95

8-- #113 109 021D...Cam Stock 12/1600cc...Flat Gear...approx. 295 lift x 225 dur  "Quote" $39.95     Timing gear backlash .0000" / .0019" or .00mm / .05mm  
           See Bottom of this page for more cam gear options... ? Tight Cam-> Q&A  *Click  Cam's used in VW Manufactures Specifications & numbers --> *info
8-- #113 109 021G...Cam Stock with dished Gear..8/71-on  "Quote" $44.95 Must be used with correct oil pump  
8-- #111 109 021...36 hp cams...  

9-- #VAC 109085...Cam 274Duration x 462 Lift  "Quote" $69.95     Cam's used in VW Manufactures Specifications & numbers --> *info
9-- #W100...Engle Cam 276 Duration x 420 Lift   "Quote" $69.95
9-- #W110...Engle Cam 284 Duration x 430 Lift   "Quote" $69.95
9-- #W120...Engle Cam 294 Duration x 437 Lift   "Quote" $69.95
Special Note: Check with experienced Engine builder for cam recommendations. "Help on picking the correct cam" --> *info
9-- #............Aftermarket cam page coming soon..  Compare Lift & Dur. *Click      Cam Break- In

10-- #VM212 500...Cam Gear Bolt on... 3-bolt Flat... "Quote" $25.95     Timing gear backlash .0000" / .0019" or .00mm / .05mm 
10-- #113 109 911A..Cam Gear Bolt on... 3-bolt Flat... "Quote" recycled $12.07    (when installed in case half it should not try to clime out of case when gear is rotated) "To Tight"
10-- #113 109 111B..Cam Gear Bolt on...4-bolt Dished... "Quote" recycled $12.07
10-- #VC1419...Cam Gear Adjustable... "Quote"   $41.95
10a-- #AC109309B...Cam Gear Bolts (Special) Not Shown... "Quote"
10-- #VRE5462...Cam Gear 17 degree (Porsche Type)  "Quote"
10-- #Cam gear Set...Straight tooth Steel...Shown Below... "Quote"     Backlash=.0000" to .0019

11-- #113 109 309CBR...Cam Followers...28.6mm x 96.6 grams Stock German Lifters... "Quote" $4.25
11-- #113 109 309C...Cam Followers / Lifters Stock 28.6mm... "Quote"
11-- #113 109 309CPR... Lifter ...31mm x 93.8 grams...HD Race  "Quote" $4.95
.
.. Lifter bores new are .7480" to .7488" diameter and maximum wear limit is .7500" ...The stock radial play is .0008"/.0024" and the wear limit is given as .0047" ....You can have the lifter bores sleeved but this would be a little expensive on a stock case. 

12-- #113 109 345A...Pushrod Tube Seals..(16). "Quote"   $ .20 Install Dry, No paint, oil, or sealer. order

13-- #311 109 335...Push Rod Tubes...Stock 13-1600cc...8 3/8" long... (8)...order
13-- #113 109 335...Push Rod Tubes...40 hp 7 7/8"...order       Note: these can be used on Stroker  Motors where stock 1600cc tubs are to long
13-- #111 109 335...Push Rod Tubes...36 hp 6 3/4"...
13-- #123 010 335..Push Rod Tubes...Nylon Pushrod adjustable Tubes...order
13-- #VC1569...Push Rod Tubes...Cadmium Plated Set of 8...order
13-- #VC1565...Push Rod Tubes...4mm Dia. Race Tubes...
13-- #AC109 369...Push Rod Tubes...Alum./Spring Loaded set...order
 . . . Pushrod Tube Length before Installing is 7.48" / 7.52" from rubber seating surface to seating surface. . .
...Note: The 13/1600 Push Rod tube is bottomed out  when compressed to about 7 3/8" length.  If the distance from head to case is less then this you must run the 40 HP tubes or after market ones. 
14-- #113 109 345A...Push Rod Tube Rubbers...(16)...order

15-- #311 109 301A...Push Rods...Stock Alum. 13-1600cc 11" long... "Quote" $3.85 each
15-- #UPR...Push Rods...Stock Alum. Recycled...13-1600cc 11" long... "Quote" recycled $2.00 each
15-- #113 109 301D...Push Rods...40 hp-1200cc 10 5/8" long 
15-- #V109433...Push Rods Chromoly...You cut to Fit... "Quote"
 ...Note: Steel and Chromoly Push Rods require the valve clearance to be set differently. Instead of setting  valves to .006 they will normally be set at .000/.001 cold

16-- #V198407...Rocker Assy. Rebuilt...Stock... "Quote"
16--#VCCOOL...Rocker Assy. Rebuilt with 1 to 1 ex. and 1.1 to 1 intake rockers (Cam Cooler)..$39.97
16-- #311 109 443B...Rocker Arm...1:1-1 Raito...13-1600cc
16-- #VC1645...Rocker Arms...1.25 Ratio Rocker Kit...10% More HP...order  $112.95

17-- #043 109 451...Valve Adjusting Screws...(8)...order  $ .75 each
17-- #VM00 4061...Valve Adjusters...Captive Ball set of 8...order  $21.95

18-- #113 109 021G...Cam Dished 4-Bolt...Stock 8/71-on...Normally replaced with 3-bolt cam which requires different oil pump.  "Quote"   

19-- #V109440...Cam Gear Set w/Straight Cut Gear Teeth...Less Drag   "Quote"

20-- #VRE5462...Cam Gear 17' Porsche Type...Reportedly reduces Drag and Friction up to 10% / Less thrust Load on cam bearings

21-- #VRE5462G...Cam Gear 17' Porsche Type w/.100" Oil relief Grove..."Quote" $52.95

22-- #VC1419...Cam Gear Adj. Stock Type... 3-bolt... "Quote" $41.95

23-- #111 109 611A...36 hp Exhaust Valve...28.6mm...up to 7/60

24-- #111 109 601A...36 hp Intake Valve...30mm...up to 7/60

25-- #111 109 301A...36 hp Push Rod...up to 7/60   "Quote"   $8.95 each 

26-- #113 109 427C...Rocker Shaft Support...13/1600cc...  Use "O" rings under rocker arm stand only if head has cut for them.
26-- #V13 109 427C...Rocker Shaft Support Recycled...13/1600cc... "Quote" recycled $2.50 each
26-- #.....................Rocker Shaft Support...40 hp 1200cc...
26a-- #....................Rocker Arm Stud
26b-- #8125NL...Rocker Arm Stud Nut...Self Locking   "Quote"   $.35 each 
 . . . Note: The chamfered edge on the 1966 and later rocker shaft support points outward (away from the head )
       and the slot points upward. . . .
27-- #113 109 407...Rocker Shaft 12/1600cc...
27-- #AC109460...H.D. Rocker Shaft Solid Kit w/Shims...eliminates #29 & #30  order
27-- #VAC 109 460...Rocker Shaft Solid Kit w/Shims...Eliminates #29 & #30  "Quote"
 Set up the Solid Rocker Rocker Kits with about .006" side clearance for best results.
28-- #113 109 435...Rocker Shaft Washer...Stock...
28-- #VM004055....Rocker Shaft Washers....015" (8)... "Quote" $3.95
28-- #VM004056....Rocker Shaft Washers....030" (8)... "Quote" $3.95
28-- #VM004057....Rocker Shaft Washers....060" (8)... "Quote" $3.95

29-- #113 109 437....Rocker Shaft Wavy Washer...stock... "Quote"  $ .60
 Some aftermarket cams put to much pressure on stock clips & wavy washers so Solid rocker shafts & spacers must be used.      Q&A Rocker Slap->*Click
30-- #113 109 439...Spring Clip for stock rocker shaft...


   Left Photo ------ New type dished cam has cast on non removable gear. 71-on

   Center Photo - Top to Bottom. 
   Top Gear--------- #V109 440...Straight Cut steel gear set...Minim Drag...
   Second Gear --- #VRE5462...17 degree tooth gear set "Porsche Type" 36hp
                      (can be used in place of 12/1600cc gear set for less drag.)
   Third from top -- Modified w/.100" wide grove cut down center to reduce oil pumping of cam gear.
   Forth from top -- Stock Flat Gear as used on most after-market cams. Adjustable or fixed bolt on.

   Right Photo------ #V109 440...Cam Gear.. Straight Cut Gear set.
   Lifters / Cam Followers --> See #11    Cam Gear Backlash should be between .000" to .002" or 0.00 mm / 0.05 mm

 Go Back       Top of page            Picking the cam by the numbers->*ck      Truing cam tunnel when Line Bored-> *ck


Sample:  When  entering  VW  part  number  enter  with  spaces  211 611 011J   not   211611011J  


  

Victor Comp. Products Inc. **--Vic's--**Phone 816-650-3535 230 S Hudson St., Buckner, Missouri, 64016, US
All Questions should be E-Mailed to Vic's

Contact Webmaster