1800vw

Sample: When entering VW part number enter with spaces 211 611 011J not 211611011J

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray -> order > E-mail for price

1-- #113 517 289A...Cap, Finel Drive, L/R...68 AT & T-1...69-79 "Quote" $2.95
1-- #002 517 289A...Grease Cap, Drive Flange, L/R...T2...68-79 "Quote" $4.95

2-- #113 517 259...or...279... Circlip / Snap Ring 15/16" ID "Quote" $1.00
2-- #002 517 289A...Snap Ring...T2 8/67-7/79..."Quote" $4.95 "Not for 091 6-rib"

3-- #113 517 283... Flange for CV "Quote"
3-- #VCVF...Recycled Flange for CV T-1...3 5/8" Dia. CV "Quote" $17.57
3-- #CVFB...Recycled Flange for CV T-2...3 7/8" Dia. CV "Quote" $22.95 Note: 091 / 6-rib T2 Tran has larger splined shaft diameter.

4-- #113 517 279... Circlip "Quote" $1.00

5-- #113 517 201A...Adjusting Washer... 0.15...comes in (10) different thickness
5-- #113 517 203A...Adjusting Washer... 0.3
5-- #113 517 204A...Adjusting Washer... 0.4
5-- #113 517 205A...Adjusting Washer... 0.5
5-- #113 517 206A...Adjusting Washer... 0.6
5-- #113 517 207A...Adjusting Washer... 0.7
5-- #113 517 208A...Adjusting Washer... 0.8
5-- #113 517 210A...Adjusting Washer... 1.0
5-- #024 409 210E...Adjusting Washer... 0.9
5-- #113 517 221A...Adjusting Washer... 1.2

6-- #113 517 185C...Bearing Taper Roller ...41 x 68-17.6
6a-- #V13 517 185C...Bearing Taper Roller ...41 x 68-17.6 "Quote" Recycled $5.95

7-- #N 010 258 4...Hex Screw... M10 x 28

8-- # V13 517 135...Side Plate "Quote" recycled $14.95

9-- #113 517 183... Thrust Washer
9-- #V13 517R...Thrust Washer...2.285" OD x 1.310" ID x .022" Thick recycled "Quote" $1.45

10-- # V13 153R...Short Shaft w/Gear...3 1/8" long Recycled Only "Quote" $14.95 "Not for 091 6-rib"

11-- #111 517 169...Pinion Gear 11 tooth used with 17t Gears
11-- #PH439...Pinion Gear 11 tooth used with 17t Gears ...recycled "Quote" $22.97

12-- #004 517 241... Spacer Sleeve... 28.82mm
12-- #004 517 243... Spacer Sleeve... 29mm / 1.141"
12-- #V04 1141... Spacer Sleeve... 29mm / 1.141" recycled "Quote" $
12-- #004 517 244... Spacer Sleeve... 29.09mm
12-- #004 517 245... Spacer Sleeve... 29.18mm / 1.149"

13-- #111 517 169...Pinion Gear
13-- #PH439...Pinion Gear 11 tooth used with 17t Gears ...recycled "Quote" $17.95

14-- # V13 475A...Long Shaft w/Gear...4.75" long "Quote" $17.95 Recycled Only "Not for 091 6-rib"

15-- #113 517 183... Thrust Washer
15-- #V13 517R...Thrust Washer...2.285" OD x 1.310" ID x .022" Thick recycled "Quote" $1.45

16-- #111 517 181A... Spring Pin
16a-- #V11 517 181... Spring Pin   "Quote" recycled
16b-- #V11 517 181S... Solid Pin  __ x __ "Quote" recycled

17-- #111 517 177... Pinion Gear Shaft
17a-- #V11 517 177... Pinion Gear Shaft .630" dia. x 4.100" long "Quote" recycled

18-- #113 517 121F...Housing
18a-- #V13 517 121F...Housing "Quote" recycled $22.95
18b-- #IRSD...Differential Assemble T-1 Includes # 8, 9, 10, 11, 13, 14, 15, 16, 17, &18 "Quote" recycled $57.95
18a-- #IRSB...Differential Assemble T-2 Includes # 8, 9, 10, 11, 13, 14, 15, 16, 17, &18 "Quote" recycled $65.95

19-- #211 517 143A...Ring & Pinion...4.37:1, 8-Bolt, Kyed 4th, fits 311 Trans order
19-- #200 517 143...Ring & Pinion...8.37:1, 8-Bolt, Splined 4th, fits 311 Trans (original was 4.62:1) order
Note: Backlash can be measured with a dial indicator against a rod that is stuck through the drain hole. If you don't have Prussian Blue to check the ring & pinion you can use the wife's lipstick. For Maximum strength the off road racers set the backlash to almost zero, but it will be noisy.
The later "Tall gearing" (high speed / low numerical ratio) will be stronger than a slow speed R&P (high numerical ratio)

20-- #113 517 185C...Taper Roller Bearing...69-75... 41 x 68-17.6 "Quote" recycled $5.95

21-- # Same as # 5

22-- #113 517 279... Circlip "Quote" $1.00

23-- #113 517 283... Flange for CV
23-- #VCVF...Recycled Flange for CV T-1..."Quote" $17.57
23-- #CVFB...Recycled Flange for CV T-2...3 7/8" Dia. CV "Quote" $22.95      Note: 091 / 6-rib T2 Tran has larger splined shaft diameter.

24-- #113 517 259...or...279... Circlip / Snap Ring "Quote" $1.00
24-- #002 517 289A...Snap Ring       "Not for 091 6-rib"

25-- #113 517 289A...Cap, Finel Drive, L/R...68 AT & T-1...69-79 "Quote" $2.95
25-- #002 517 289A...Grease Cap, Drive Flange, L/R...T2...68-79 "Quote" $4.95 "Not for 091 6-rib"

.....More on Transmission Gears click