1800vw

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray -> E-mail for price

1-- #113 117 021...Oil Cooler T1...8/70-7/79 & T2...8/70-7/71 Make Cooler Test Tool
1-- Oil Cooler external Kits -- order

2-- #311 117 021...Oil Cooler T3 Rebuilt Make Cooler Test Tool
2-- #311 117 021BX...Oil Cooler Rebuilt...T-3 "Quote"
   Note this can be used on upright motors if you need #5 for oil pressure switch or gage "Quote"

3-- #111 117 021E...Oil Cooler to Motor #H1350000 & #H5900000...54-7/70 some give as 46-70   Make Cooler Test Tool
      ****   Special on Early Oil Coolers New Brazil ( Limited Quantity's ) check-> "Quote" ****
3-- #113 117 021...Oil Cooler from Motor #AE0000001...8/70-8/79 "Quote"

4-- #N 040 347 2...Hex Bolt...M6x90

5-- #311 117 021BX...Oil Cooler Rebuilt...T-3 "Quote" "can use on other years and use this fitting for oil sender or ?"

6-- #113 117 301...Oil Cooler Bracket Flange

7-- #311 119 665B...Bellows, Cooling Air Intake...T3...62-73
7a-- #311 119 671...Clamp, Small End, Cooling Air Intake Bellows...62-73
7b--#311 119 675...Clamp, Large End, Cooling Air Intake Bellows...62-73

8-- # ...Spacer Ring

9-- # N 011 524 23...Washer...A6,4x12,5x1,6

10-- #N 012 226 5...Spring Washer...B6x12x0,5

11-- #N 011 006 24...Hex Nut...M6

12-- #N 011 006 24...Hex Nut...M6

13-- #N 011 652 1...Washer...7x12x1,2

14-- #

15-- #111 117 151...Sealing Washer...

16-- #

17-- #

18-- #N 014 553 1...Stud...AM6Ax82

19-- # 113 117 303... Oil Cooler Offset w/studs "Quote"

20-- # . . . . . . . . ....Stud...8mm

21-- #111 117 151...Seal for Oil Cooler...1/54-7/69 "Quote" (comes in gasket set)
21-- #111 198 151...Seal for Oil Cooler...8/8mm...cooler to adp. & adp. to case...46-70 "Quote"
21-- #021 117 151A...Seal for Oil Cooler...8/69-8/79 "Quote" (comes in gasket set)
21-- #021 198 151A...Seals for Oil Cooler...10/10mm...71-79 "Quote" (comes in gasket set)
21-- #111 198 029...Seal & Washer Kit, (Marked Green) For Oil Cooler...8/60-8/79 Used w/later Oil Cooler & Case "Quote"
21-- #VJ 105 330...Gasket Seal for Oil Cooler (takes the place of all seals above)-->*click order

22-- #N 014 443 12...AM8Ax38

23-- #N 014 539 1...Stud...AM6Ax56

24-- #See #21 and -->*click order

25-- #N 011 524 7...Washer...A6,4x12,5x1,6

26-- #N 012 226 5...Spring Washer

27-- #N 011 006 8...Hex Nut...M6

28-- #V13 117 323... Cooler Tin (Many builders forget to install this small but important part) recycled "Quote"

29-- #N 011 524 7...Washer...A6,4x12,5x1,6

30-- #N 012 226 5...Spring Washer

31-- #N 011 006 8...Hex Nut...M6

32-- #N 011 006 8...Hex Nut...M6

33-- #N 012 226 5...Spring Washer

Note: T-1 Dual Oil Relief cases started 8-70 "No grove on outer diameter of piston up to 8/70" Grooved piston can be used as replacement on all motors

How to Make Simple Oil cooler Test Tool --> *Information

Off Road Oil Cooler Placement --->*info

VDO Oil Pressure Gage 0-80 psi --> "Quote" VDO Oil Pressure Dual Sender --> "Quote"