1800vw

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray -> order > E-mail for price

1-- Late Straight Shift Lever has 12x1.5mm threads
1-- Early Bent Shift Lever has Small ___ threads
1-- #V711 211...Aftermarket Shifter "Hurst Type with Ring Trigger rev/lock out --- order

2-- #111 711 121G...Gearshift Lever..."Bent"...1949-67...See #4 order
2-- #113 711 121C...Gearshift Lever..."Straight"...68-79...See #4 order

3-- #113 711 141D...Gearshift Knob...M12x1.5...Late Straight

4-- #113 798 121...Shifter Assembly use up to 71...Bent w/pin... order
4-- #SHF...Shifter for T-1 Bug   "Quote" recycled
4-- #VAMS...Shifter for T-1 Automatic w/points   "Quote"   recycled
4-- #SHF2...Shifter for T-2 Bus   "Quote"   recycled
4-- #SHF3...Shifter for T-3 Bug

5-- #111 711 115A...Rubber Boot...8/60-12/77 "Quote"

6-- #N 010 240 16...Hex Bolt...M8x20

7-- #131 821 150...8mm Spring Washer

8-- #N 011 654 5...Washer 9,5x17x1... "Quote"

9-- #111 711 105A...Ball Housing for Lever
9a-- #111 711 149B...and Ball Housing for Lever
9b--#V711 010...Quick Shift Kit... "Quote"

10-- #411 711 133...Guide
9b--#V711 010...Quick Shift Kit...Comes with Alum Spacer and new Pivot Guide "Quote"

11-- # Locating Pin required when using bent shifters ( 49-67 )

12-- #211 711 145A...Spring
12-- VSP...Shift Spring... "Quote" recycled

13-- #211 711 149...Reverse Lock-Out plate... "Quote"
Install with large tab up and to the right
14-- Early Bent Shifter had Slot cut in front and Late Straight Shifter had NO Slot
14-- #AC 711 130...Shift Rod "Universal" Long Straight w/Slot Rear Blank (cut to length) order

15-- #111 711 155G...Shift Rod... F113 2000 001 >
15a-- #113 711 155...Shift Rod.. 46-64 or F118 000 001 > 112 3200 000
15ba- #V13 711 155...Shift Rod.. Recycled "Quote" recycled
15-- #AC 711 130...Shift Rod "Universal" Long Straight w/Slot...Rear Blank (cut to length) order

16-- #VM16 2070...Shift Rod adjuster "weld on for early coupler" see #9 - order
16a-- See this page--- *click

17-- #311 798 211...Shift Coupler Assembly for 9/63-79 T-1... "Quote"   or order
17a-- #111 711 175B...Shift Coupler Assembly for up-8/63...Round... order
17b-- #211 711 189A...Screw for early Coupler above... order
17c-- #V42 5260C...Chrome U-Joint used with Super Shifter...order    > AC-2
17d-- #V710 002...Adjustable Shift Rod End (weld in & use above U-Joint or early coupler) order >> A-24
     Note: Bad Transmission Mounts can cause Transmission to jump out of gear.

18-- #...Not Available Separate

19-- #823 711 477...Shift Coupler Guide ... "Quote"

20-- #211 711 189A...Screw for Coupler... "Quote"

21-- #823 711 477...Shift Coupler Guide ... "Quote" >6-6

22-- #311 711 239...Cap...Not Available...

23-- #311 711 243...Self Tapping Screw...Not Available Separate...

24-- #VAMS... Shifter w/switch for Auto-Stick Shift... "Quote"

Note: Bad Transmission Mounts can cause Transmission to jump out of gear.