1800vw

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will put VW part numbers in place as they are available
Many Parts are available, but not listed yet. Shown in Gray -> E-mail for price

1-- #113 501 815...Protective tube   "Short Rubber tub"

2-- #113 501 805...Equalizer torsion bar ...
2a- #V13 501 805...Equalizer torsion bar 37" in length and .440" torsion bar diameter w/.510" dia. ends "Quote" recycled
2a- #V13 501 806...Equalizer torsion bar 38 3/4" long and .485" torsion. bar diameter w/.490" dia. ends "Quote" recycled

3-- #

4-- #113 501 809...Bracket...Inner

5-- #113 501 813...Rubber Bracket inner mounting

6-- #113 501 811...Bracket...Outer

6.5 (not shown) #V13 501 811...Bracket Assemble for Long Bar w/rubber insert ... "Bolt-on 4 1/2" x 2 1/4" x 1 7/8" thick" "Quote" recycled

7-- #N 012 038 7...Lock Washer...8mm

8-- #8125N...Hex Nut...8mm

9--V13 501 820...Lever...Cast Right or Left side (use with horizontal connecting bolt #12 ) recycled not available at present
9b- #V13 501 833...Lever...Stamped Steel R/L "Quote" recycled
. . . Also See #27 (used with vertical Push Rod #19) ...

10-- #111 413 381A...Rubber Mounting bushing

11-- #211 513 371...Bushing

12-- #113 501 899...Hex Head Bolt

13-- ...comes with #19 ...

14-- #113 501 737A...Rubber stop
14-- #V13 501 737...Rubber stop "Quote" recycled

15-- #113 501 753...Guide Ring "Hard Rubber"

16-- #V61 501 575...Washer..1 3/16" dia x 1/8" thick "Quote" recycled

17-- #113 415 431A...Hex Nut Self Locking...8mm

18-- #113 501 840...Guide
18a-- #V13 501 840...Guide "Quote" recycled

19-- #113 501 819A...Push rod...Left
19a-- #113 501 820A...Push rod...Right

20-- #N 012 042 4...Lock Washer

21-- #N 011 162 9...Hex Nut...12x1.5 mm

22-- #N 011 152 5...Hex Head Nut

23-- #113 501 899A...Socket Head Bolt
23a- #V13 501 899...Special Socket Head Bolt & Locking Nut "Locks arm to #2 Shaft" "Quote" recycled

24-- #V13 415 431...Self Locking Hex Nut...8mm "Quote" recycled
24a- # Rubber cover Cap... Snaps over washer to cover nut.

25-- # ... New No Longer Available...
25a- # V13 113 160...Washer 1 13/16" diameter formed top retaining washer. also holds rubber cap. "Quote" recycled

26-- #V13 501 835 ...Robber Mounting Pads "Quote" recycled

27-- #V13 501 000...Lever...Cast Right or Left side (use with vertical connecting rod) "Quote" recycled
27a- #V13 501 833...Lever...Stamped Steel "Quote" recycled

28-- #V13 501 835 ...Robber Mounting Pads "Quote" recycled

29-- # ... Not available separate ...welded to shaft #32

30-- #... Not available separate ...welded to shaft #32

31-- #V13 501 737...Rubber stop "Quote" recycled

32-- #...V13 501 819...Push rod "Threaded on both ends" Short - 10 1/2" long "Quote" recycled
32a-- #...V13 501 820... Push rod "Threaded on both ends" Long - 12" long "Quote" recycled

33-- # ... Plastic sleeve for sliding surface....New No Longer Available...

34-- # ... Plastic sleeve for sliding surface...New No Longer Available...

The equalizer bar is a side-to-side torsion bar connected to the axels. The equalizer includes two levers #9 pointed in opposite directions connected to two operating rods #19. The purpose of the equalizer is to provide an additional progressive spring action to assist the torsion bars when under load. Because the levers #19 are positioned in opposite directions the equalizer does not affect body role. Note: The levers