Need
Price &
Availability of
these
Parts
"Quote"
Q&A
Lower
end ck
Note: Motor Tin shown is for late model 1600cc T-1 engine, See Part number for years it is used on. Buggies: All cooling tin above the centerline of the cylinders must be used, cooling tin below center of cylinders is not normally used, Except part number 27 which must be used for proper cooling of cylinders.
We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
So use them at your own risk.
If you find a wrong part number please let us know. Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be
the same as a 1967....... Part numbers starting with a "V" are Vic,s part
numbers.
vw@vwhelp.com We will put VW part numbers in place as they are available.
Many Parts are available but not listed
yet. Shown in Gray ->
order >
E-mail for price
1 -- #N107144...6x12mm Cooling Tin screw
no/washer
1-- #N107142...6x12 mm Cooling Tin screw
w/washer
"Quote"
1-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
2-- #N115571...6mm Flat Washer (6FW) "Quote"
3-- #113 119 303...Dual Port Head Shroud Left side
3-- #113 119 304...Dual Port Head Shroud Right side
3-- #V11 9341...Dual Port Tin...Chrome Set..."Quote"
$25.95/set
3--#211 119 903B...Single Port Cylinder Tin Set 13-1600cc
"Left"
"Quote"
3--#113 119 304G...Single Port Cylinder Tin Set 13-1600cc
"Right"
"Quote"
4-- #113 119 583...Nut...6mm
5-- #113 119 543Z...Seal Kit for Doghouse Exit Ducts
6-- #N115571...6mm Flat Washer (6FW) "Quote"
7-- #N107144...6x12mm Cooling Tin screw no/washer
7-- #N107142...6x12 mm Cooling Tin screw w/washer
"Quote"
7-- #612SW...Screw
w/washer 6x12mm "Quote"
# 61224...24
pcs $4.95
8--#113 119 419...Oil cooler Lower Exit Duct used
w/doghouse cooler #113 117 021...1971-79 "Quote"
8a-#V105976...Oil cooler Exit Duct Kit Comes with #8
& #11 "Quote"
$14.95
9-- #N115571...6mm Flat Washer (6FW) "Quote"
10-- #N10210.1...6mm Bolt. "Quote"
11-- #113 119 431...Oil cooler Upper Air Exit Duct used
w/doghouse oil cooler 1971-79 "Quote"
11a-#V105976...Oil cooler Exit Duct Kit Comes with #8
& #11 "Quote"
$14.95
12-- #N115571...6mm Flat Washer (6FW) order
13-- #...N10210.1...6mm Bolt. order
14-- #311 971 939...Cable Terminal
15-- #113 119 571...rubber Plug
16-- #113 119 V2...Lower Pulley tin All T-1 "Quote"
17-- #N107144...6x12mm Cooling Tin screw no/washer
17-- #N107142...6x12 mm Cooling Tin screw w/washer
order
17-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
18-- #N115571...6mm Flat Washer (6FW) order
19-- #113 119 517R... Engine Firewall cover plate T-1
8/60-7/70 without air cooler
discharge hole
19-- #113 119 517S... Engine Firewall cover plate T-1
& SB 8/70-7/74
19-- #VC1953...Engine Firewall Cover Tin "Chrome With
2-large Holes" "Quote"
$18.95
20-- #N20092.1...Grommet for Accelerator tub
21-- #N20091.1...Grommet for Metal Fuel Line:
22--#...No Longer Available...
23-- #113 119 543Z...Seal Kit for Doghouse Exit Ducts
23-- #V13 119 543Z...Seal for Doghouse Exit Ducts
Recycled $2.95
24-- #311 119 357...Air Deflector plate Left rear...8/61-7/73
24-- #131 119 357...Air Deflector plate Left rear..."shown
w/hole"...8/61-7/73
24-- #V11 119 357...Air Deflector plate Left rear..."shown
w/hole"...8/61-7/73 "Quote"
Recycled $7.95
24-- #V31 119 357...Air Deflector plate Left rear..."No
Hole"...8/61-7/73 "Quote"
Recycled $3.95
24-- #131 119 358A...Air Deflector plate Right rear "not shown"
8/61-7/73 "Quote" new
$6.95
24-- #V13 119 358A...Air Deflector plate Right rear...looks
like #24...8/61-7/73 "Quote"
Recycled $7.95
...
Number 24 bolts to #3 (D.P.Tin) One with hole is on Rt. side ...
25-- #N107144...6x12mm Cooling Tin screw no/washer
25-- #N107142...6x12 mm Cooling Tin screw w/washer
order
25-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
26-- #N115571...6mm Flat Washer (6FW) order
27-- #311 119 317A...Air Deflector tin...8/60-7/79 (can be used on all
T-1 motors) Note: This
is he best air Deflectors for Buggies & Off Road cars as it does
not collect & hold dirt. "Quote"
$2.25
27-- #113 119 451D...Air Deflector tin
(used
on some SB) cools cylinders slightly better but traps dirt....
some books show Left #126 119 461 & Right
#126 119 462
used w/out heat exchangers.
"Quote"
27-- #311 119 317AX...Air Deflector tin 36hp..."Quote"
Recycled $2.95 each
... Installs directly under cylinders above push rod tubs
... easy to forget to install first ... air deflectors or super tin ...
28-- #N107144...6x12mm Cooling Tin screw no/washer
28-- #N107142...6x12 mm Cooling Tin screw w/washer
28-- #612SW...Screw w/washer 6x12mm "Quote"
# 61224...24 pcs
$4.95
29-- #N 011 652 1...Washer
30-- #043 119 351B...Heater Channel splash tin, Right Lower side #1
& #2 cylinders 8/61-7/73
"Quote"
. . . . Note: On Buggy's the only
tin needed below the centerline of the cylinders is the deflector tin
directly under the cylinders. . . # 34
31-- #N115571...6mm Flat Washer (6FW) order
32-- #N107144...6x12mm Cooling Tin screw
no/washer
32-- #N107142...6x12 mm Cooling Tin screw
w/washer
order
32-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
33-- #N107144...6x12mm Cooling Tin screw
no/washer
33-- #N107142...6x12 mm Cooling Tin screw
w/washer
order
33-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
34-- #N115571...6mm Flat Washer (6FW) order
35-- #113 119 533H...Brest Plate, Below crankshaft pulley. 13-1600cc thru-7/70 "Quote"
36-- #211 831 449...Plug...24mm
37-- #020 004 1...Plug ...A16,5
37-- #020 028 1...Plug ...A7x1,5
38-- #N115571...6mm Flat Washer (6FW) order
39-- #N107144...6x12mm Cooling Tin screw
no/washer
39-- #N107142...6x12 mm Cooling Tin screw
w/washer
order
39-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
40-- #113 119 571...Grommet 25mm carb preheat hose for 38mm hole
41-- #113 119 581...Plug...38mm
42-- #113 119 523...Rear Eng Cover Tin "With NO Holes"
13-1600cc
42-- #113 119 523C...Rear Eng Cover Tin as above
but w/Manifold Heat
13-1600cc
42-- #113 119 523D...Rear Eng Cover Tin, Fresh Air,
w/Manifold Heat &
carb pre-heat
42-- #113 119 523E...Rear Eng Cover Tin, Fresh Air,
w/o manifold heat
& carb pre-heat
42-- #113 119 523F...Rear Eng Cover Tin, Fresh Air,
w/manifold heat, w/o
carb pre-heat
43-- #113 119 585B or A...Grommet, Fresh Air Hose Thru rear engine cover.
44-- #113 119 579A...Shield "Left Rear"
44-- #113 119 580A...Shield "Right Rear"
45-- #113 119 597E...Gasket...Rear
46-- #113 119 599E...Gasket...Front
47-- #113 119 577C...Shield...Left Front
48-- #N107144...6x12mm Cooling Tin screw no/washer
48-- #N107142...6x12 mm Cooling Tin screw w/washer
order
48-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
49-- #N115571...6mm Flat Washer (6FW) order
50-- #043 119 350B...Heater Channel Tin (set of 2) Lower left #3 &
#4 cylinders 8/61-7/73
"Quote"
. . . . Note: On Buggy's the only tin
needed below the centerline of the cylinders is the deflector tin
directly under the cylinders. . . # 34
51-- #043 119 350B...Heater Channel Tin (set of 2) Lower left #3 &
#4 cylinders 8/61-7/73
"Quote"
51-- #VJ10 6205...Heater Channel Tin "Chrome" Front
Part 8/61-7/73
"Quote"
$12.95
. . . . Note: On Buggy's the only tin needed below the centerline of the
cylinders is the deflector tin directly under the cylinders. . .
# 34
52-- #113 119 351...Heater Channel...Lower Left
53-- #113 119 385...Heater Flap...Left Rear
54-- #N 020 022 3...Plug...A8x1
55-- #...No Longer Available...
56-- #N115571...6mm Flat Washer (6FW) order
57-- #N 010 710 8...Phillips Head Screw...AM6x10
57-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
58-- #211 119 577...Protection Plate, Right Pre-Heat Pipe T-1&2
12/62-7/73
"Quote"
recycled assy. $3.95
58-- #211 119 578...Protection Plate, Left Pre-Heat Pipe T-1&2
12/62-7/73
"Quote"
recycled assy. $3.95
59-- #N115571...6mm Flat Washer (6FW) order
60-- #N107144...6x12mm Cooling Tin screw no/washer
60-- #N107142...6x12 mm Cooling Tin screw w/washer
order
60-- #612SW...Screw w/washer 6x12mm
"Quote"
# 61224...24 pcs
$4.95
61-- #113 119 599A...Gasket Cover for heat riser (large): order
62-- #113 119 597...Half round gasket, Rear manifold pre-heat pipe T1
12/62-8/73 & T2 12/61-7/71
62-- #113 119 599...Half round gasket, Front manifold pre-heat pipe T1
12/62-7/73 & T2 12/61-7/73
63-- #...No Longer Available...
64-- #...No Longer Available...
65-- #N 020 022 3...Plug...A8x1
Case & Cylinders-->
*Click*
Go Back
All Questions should be E-Mailed to Vic's
Contact Webmaster